The Art of Motion Capture

 

This would be an interesting job.

Lathe

I found a video on youtube about how to make a Jaw Breaker shot glass using a lathe.

That looks so fun! I have never used a lathe before but it looks very interesting!
I checked Amazon.com for prices of Lathes and some books on how to do it.

While I was looking I found a book called  Tauntons Complete Illustrated Guide To Turning. The preview looked very helpful and I would consider buying this book if I was going to teach myself to do this. Unfortunately I live in an apartment and all of the saw dust (or sugar dust) would get everywhere. This is something that requires some workspace.

Casting

My original fish for the plaster casting project was very large. We made a wooden support for him so that he would he completely 3D to be hung. It was hard to scale him down because the wooden support was a bit large.

 We used 3 tubes of clear silicone calking which ended up being a bit chunky on the outside

 The master mold was made of plaster and turned out ok. The biggest problem was that the tail portion of the fish was lower than the poor spout we created

 When the plasrer was poured we kept ending up with chunks missing out of the tail. After three castings I found that if the plaster is poured earlier while still wet and then sloshed up I could fill in the tail.

Bubbles were formed from the liquidy plaster being poured early and fast. The big fish was not working out very well and was too large anyways. I decided to go home and just start over with a smaller fish like I originally had designed

 I made the second fish out of sculpey. I made two of them much smaller with fairly simple designs as my sculpey was very old and brittle. I made the two silicone molds

I chose the better looking of the two and made a small plaster master mold for it.

 This one fit in the bucket and made pouring very easy as I made a large access hole and a flat bottom

The small fish came out without many problems at all. I made about 12 of them. 3 of them broke while sanding them and breaking off the pouring spout but 9 survived, I sealed them with shellac and denatured alcohol and spray painted them. 8 of them were painted metallic black and chrome with a clear gloss finish and one was painted red and chrome with a clear gloss finish

 I drilled holes in the fish and added small eye hooks with epoxy  to hang them from. As I was hanging the fish from fishing line two of them fell and broke.The plaster was pretty soft and they both sustained tail breakage. It was just before we were to show them so I wasnt able to fix them.

Luckily there were still enough fish to get the point across and I was able to finish hanging them and present them. Overall they turned out ok. They spun in the wind which added a more lifelike quality to them.

I learned a lot from this project and I was able to do every step on my own from home. My next one will be a bit more complex now that I have a better grip on what I am doing.

Wooden Dragon Continued

I used the band saw for a majority of the cutting and then sanded down the parts. The shape of the tail made it particularly hard to cut with the band saw because it would hit the wall and get in the way. This picture is of the head body and tail finally put together. I took a photo with it to show how tall it was getting.

I attached the legs and added feet and claws. I made the feet flat so that it could stand on its own two feet and I added claws to the feet. The claws ended up helping give the dragon a wider footprint and made it more stable. Because I ended up having to make my dragon a lot thinner than I had originally planned he did not have a very wide stance and so the ankles ended up having to attach to the sides of the feet which gave the dragon a bit of a wobble side to side. The claws helped with this and later triangles were added to the ankles for extra support. He can stand on his own pretty well but if he were to be outside in the wind I think I would add an additional pole or something for stability as he could still be knocked over possibly in a large gust.

Once the dragon was all put together I painted on white outdoor primer on him. For any interior parts I felt I could not reach with the brush I used a spray on primer. I then started painting him a cherry red color with some outdoor paint. It took a lot longer to paint the sculpture than I had originally thought it would. The paint also ended up costing a lot more than I expected.

I added touches of black to his horns, tongue, and claws. Here he is after he was finished being painted

Here is a close up of the black trim on his horns and tongue

We had to take the sculptures home by the weekend because they are so big and take up so much space. We did not have a truck and we weren't sure if or how we were going to get it home. Luckily the back seat of my husbands car folds down and we were able to get the dragon in deep enough to be secure. We used straps to hold him in and the trunk closed. I am sure it confused the other drivers on the road.

Once we got it up the stairs I realized how ridiculously huge this sculpture was. I had to take a picture of it on the balcony because I found it kind of funny. It is a little bit big to fit in the apartment and I am hoping to find a more permanent home for it soon.

Some parts of the dragon turned out really well and some parts of the dragon had to be compromised for time. I would have really liked to have made him wider with slats in between his torso and head. I also would have liked to have made the more complex wing design I had decided on which would have made him more 3-D. I also thought about hanging canvas or something from the wings to give them a membrane. Time was not on my side with this project and I simplified it quite a bit to get it done by the deadline.

All of my original measurements were pretty spot on and my initial planning went really well. If I had been more confident with the wood working tools and had more time I think that the dragon could have been just like my plans. As it is I am almost glad that it is not because it would have ended up taking up even more space!

The sculpture has outdoor paint and so it can go outside if it has to some day. I am hoping to find a place to keep it other than my apartment because it is so large.

All things considered I think I learned a lot about working with wood and I feel a lot more comfortable with the tools and process. I think that the next time I work in wood the project will go a lot quicker and smoother and I will know more what to expect.

Assignment 2 Wood Sculpture

(2/9/12) Here are my rough plans for the start of the wood sculpture. I added rough
measurements where an inch equals about a foot since it has to be as tall as me.

(2/9/12 - 2/14/12) I first drew out some of the larger shapes and made cuts with the jigsaw. Then the smaller shapes I was able to take over to the band saw and sander.

(2/14/12) I got some of the smaller parts cut out and I compared the sizes to make sure everything was going to fit together well.

Finished Sculpture 1

(2/9/12) It is finished! yay!

Different camera makes the color look drastically different

Painting The Jalapeno

(2/7/12) Here is the finished pepper all painted and ready

(2/7/12) I put the pepper back on the cart with it's veggie sculpture buddies to chill
until it is time to be critiqued.

(2/7/12) I added a gloss coat on top of the paint. It gave the body of the pepper a very shiny look. I thought it was still wet at first and so I waited around a long time for it to finish drying.

(2/7/12) We painted our clay sculptures today. I used three different green paints and a mixture of different colors on the stem. The main color used most was from a can of Rust-oleum I bought. That green ended up looking a lot better than the krylon I originally thought I would use.  We put the sculptures up on cinder blocks and painted them outside. When I was done the cinder block kind of looked like it was growing a green moss.